Study of the cross section biasing technique using GEANT4 and determination of the parasitic neutrons at N.C.S.R. “Demokritos”


HNPS Advances in Nuclear Physics vol. 29 (HNPS2022)
Δημοσιευμένα: Μαΐ 5, 2023
Anastasia Ziagkova
Michael Axiotis
Sotirios Chasapoglou
Maria Diakaki
Kalliopi Kaperoni
Michael Kokkiris
Anastasios Lagoyannis
Veatriki Michalopoulou
Roza Vlastou
Περίληψη

A simulation code was developed using the GEANT4 [1] toolkit in order to determine the   behavior of the neutron production beams generated by proton induced reactions while applying the cross section biasing technique  [2]. As the application of the biasing technique can cause a change in the physical processes occurring during the simulation, the specific implemented technique was tested via control simulations to determine any deviations of the results from the  theoretically expected ones. Different materials, geometries and biasing factors were used in order to qualify and quantify the discrepancies between the unbiased and the biased simulations.


One of the main reactions used for the production of the neutron beam at the Tandem accelerator laboratory of N.C.S.R. “Demokritos” [3] is the  3H(p,n)3He one. In the geometry of the main tritiated target, elements such as molybdenum, copper and titanium are included. During the interaction of the proton beam with them, it is possible to produce neutrons that will “contaminate” the main neutron beam. These neutrons are called parasitic and their quantification is necessary in order to avoid obtaining erroneous results in cross section measurements on the various targets under study.[4] By constructing the  proper geometry and using the GEANT4 code mentioned above, the determination of the parasitic neutrons is achieved with optimal statistical results in short computational times, while the discrepancies between the unbiased and the biased results remain minimal.

Λεπτομέρειες άρθρου
  • Ενότητα
  • Poster contributions
Αναφορές
Book For Application Developers - Book For Application Developers 11.0 documentation, https://geant4-userdoc.web.cern.ch/UsersGuides/ForApplicationDeveloper/html/index.html (accessed Feb. 26, 2022)
E. Mendoza et al., Nucl. Instrum. Methods Phys. Res. A 960, 163659 (2020) doi: 10.1016/j.nima.2020.163659
“Tandem Laboratory/Institute of Nuclear Physics/NCSR Demokritos” http://tandem.inp.demokritos.gr/ (accessed Jun. 20, 2022)
TENDL-2019 nuclear data library, https://tendl.web.psi.ch/tendl_2019/tendl2019.html (accessed Mar. 11, 2022)
G. Gkatis, “Μελέτη της αντίδρασης παραγωγής νετρονίων 3H(p,n)3He στο Ε.Κ.Ε.Φ.Ε. ‘Δημόκριτος’ – Εφαρμογή στην αντίδραση 232Th(n,f), 2021, doi: 10.26240/HEAL.NTUA.21332
Los Alamos National Laboratory: MCNP Home Page, https://mcnp.lanl.gov/ (accessed Feb. 26, 2022)
E. B. and G. Lövestam, “NeuSDesc – Neutron Source Description, Instruction Manual” (2008)